PoE extension solution is Ethernet powering on pre-existing coaxial cable.

IP extender of middle range
with Ethernet powering:

Model no:
POC-TX

Product features:
Input voltage 20-60VDC
10/100Mbps Ethernet in
Ethernet/power out
Transmission diatance-->
>=300m @ RG60 coaxial cable
Maximal passing current 1.5A

This is “Ethernet with Power over Coax” solution. It has the advantage of extending span over 100m by a very simple PoC pair. Power can also be carried over coaxial cable and converted into 12V DC in remote side. POC-TX combines 48V DC power and Ethernet data signal into coaxial cable. POC-2RX can divide data and power in the remote side. Two Ethernet data and 12V DC outputs allow user to connect and power two IP cameras. These two devices are all outdoor available. By using this product, Ethernet signal and power can pass through coaxial cable without complicated boxes and wiring engineering.

Model no:
POC-2RX

Product features:
Input voltage 18-60VDC
Power consumption: 3W
1 12VDC out/2 PoE out
Transmission distance-->
>=300m @ RG60 coaxial cable
Maximal passing current @ 12VDC-->
1.2A

IP-camera system with ethernet powering and IP extension

Model no:
POC-PWR

Product features:
Input voltage 100-240VAC
Frequency 50/60Hz
1.2A/50W output
48VDC output

Item

Adapter

Price

Add to cart

POC-TX + POC-2RX

(POC-POWR shall be purchased if needed.)

USD229.49

POC-PWR

DC48V power supply
(Plug shall be made manually by self.)

USD45